11 Dec The BORTECH Auto Bore Welding Machine Gets You Back in Action Fast!
#1
11 Dec The BORTECH Auto Bore Welding Machine Gets You Back in Action Fast!

    When repairing bores is the challenge at hand, time is of the essence. You need to get back up and running as quickly as possible without sacrificing quality, accuracy or safety. Here’s why owning a BORTECH auto bore welding machine is exactly what you need to get back in action – fast!

    Save time by performing two tasks simultaneously. Welding and boring can be performed simultaneously on different bores using the CLIMAX line boring system with the BORTECH automated bore welder.

    Quick change from line boring to welding. The BORTECH automated bore welder seamlessly interfaces with the CLIMAX bearing system for a five-minute changeover from boring to welding.

    Weld virtually any kind of workpiece. The adjustable mounting base allows the mounting of the BORTECH auto bore welder to fit any workpiece when used independently of the CLIMAX bearing mounts.

    Speed!  The BORTECH auto bore welder is up to 75% faster than hand-welding, with the ability to lay 5 lbs of metal per hour, hour after hour.

    Reduce hard spots and inclusions. The BORETECH auto bore welder reduces hard spots and inclusions by 95% vs. hand-welding.

    Beautiful welds, easier to machine. A consistent and uniform weld deposit provides a smooth, defect-free surface for subsequent machining. This reduces cutting tool wear and reduces machining time by up to 50% vs. hand-welding.

    Keyways? Split lines? No problem! The BORTECH Auto-Skip feature is perfect for skipping keyways or split lines, eliminating the need to manually “skip” no-weld areas.

    Return out-of-round bores to circular. Extended use of Auto-Skip capability allows automated correction of out-of-round bores, using Pie Mode or Carriage Return, which prevents over-boring or slugging.

    Reversible rotation for added flexibility.  Reversible rotation gives the operator the ability to weld in either rotation direction, allowing unlimited weld passes to be performed with minimal welding challenges when compared to unidirectional bore welding machines.

    Adjust torch diameter independently of torch angle. The BORTECH Offset Head provides torch diameter adjustment without changing the torch angle. Maintaining the correct torch angle makes for consistent and repeatable welding results.

    Total control of welding parameters. The BORTECH BW3000 is the only MIG bore welder that gives you control over every welding and positioning parameter.

    Improved health and safety. BORTECH auto bore welders keep operators away from harmful smoke and fumes, contributing to safety in the workplace.

    Boring business arms owners with tools for success

    The portability of its product is the feature that a small Stillwater company uses to market the patented machines it produces.

    Strangely enough, each machine weighs 420 pounds.

    Laptop computers they're not, but then the machines that Portable Line Bore Corp. manufactures are not white-collar in any way, shape or form.

    Line-boring machines are cutting tools used to repair heavy equipment--backhoes, bulldozers, front-end loaders and such--which can weigh several hundred tons. The machines shave off metal to within a 1,000th-of an-inch tolerance in the holes that house the pins that hold the the movable buckets, blades and swing arms onto the bodies of heavy equipment.

    "The holes get out of round, and when you replace the pins, they must be exactly in line," said Jeff Skaarup, a partner in Portable Line Bore Inc. with Liz Schoonmaker. If the holes are not exact, what starts out as a square ditch or level area could end up canted to one side or the other.

    Stationary line-boring machines 30 to 35 feet long can do the repairs, but when bushings break or bearing housings wear out on heavy-duty equipment, moving that large machinery to a shop for repairs can be time-consuming and expensive.

    Terry Marr, maintenance shop supervisor at the Glenbrook Nickel Co., a nickel-smelting firm in Riddle, Ore., cited a case where the company paid $17,000 for a single line-boring job, and that was for only two holes.

    "It's a very large machine that picks up thousands of tons all the time," he said of the loader that needed repairs. But it had to be transported overland 80 miles to a rail shop to be worked on.

    "We don't do a lot of [line-boring], but I know we'll be able to do it for quite a bit less," Marr said, and it shouldn't take the company long to recoup the $14,000 cost of the machine it purchased from Portable Line Bore Corp. this year.

    Skaarup added that his company's devices, which are about 2.5 feet wide and a 1.5 feet high and powered by a half-horsepower motor, will do exactly the same thing as the much larger machines.

    They can bore holes from 1.5 inches to 18 inches in diameter using an 8-foot-long cutting bar that attaches to the motor housing. And, because they are portable, the machines can be mounted on the damaged equipment horizontally or vertically.

    Even though the devices weigh a total of 420 pounds, they can be disassembled easily, Skaarup said, and one person can set one up in about 30 to 45 minutes.

    But not just anybody can use these machines.

    "You have to be mechanically inclined," Skaarup said, although perhaps not as mechanically inclined as the product's inventor--Bob Bareis, who once operated a machine shop in Altamont.

    Bareis, who developed the product in 1985 and received a U.S. patent in 1989, sold only three or four machines a year before selling the patent and manufacturing rights to Skaarup and Schoonmaker in 1996.

    RECOMMENDED

    EDUCATION

    From ideas to reality: Go inside Vandy's ideas machine

    COMMERCIAL REAL ESTATE

    Photo tour: Asurion just finished moving 2,050 employees into its new $285M downtown headquarters

    RESIDENTIAL REAL ESTATE

    Arcadia home lands 'unachievable' sale price with help from TV celebrity agent Josh Altman

    "We market it. He never did," said Schoonmaker. The company has shipped half a dozen machines since December, and has orders for three more.

    "The biggest problem was getting production set up," added Skaarup, who directs the firm's sales and marketing efforts.

    Bareis had the aluminum castings for the machine parts made in China and shipped to him for assembly, but Skaarup and Schoonmaker decided to bring that operation back to the United States in order to maintain tighter quality control. But they first had to translate the mechanical drawings from Chinese and metric measurements to English and inches, using some of the original drawings they acquired from Bareis and a computer-aided design program to verify the dimensions.

    Now, the castings are made by M.G. Carter & Sons in Coxsackie, and the parts are machined by Raloid Tool Co. in Mechanicville. The machines then are assembled by Portable Line Bore's two employees.

    "As we grow, we'll be doing more of the machining ourselves," Skaarup said, adding that the company now could make 50 machines a month with no problem, as long as it keeps the pipeline full and the castings coming.

    "It's a real fast turnover," he said. "It's not a lengthy process."

    And Skaarup and Schoonmaker think there's a market for that many machines each month.

    "Every time you turn around there's another application," Skaarup said, "We're always open to feedback from people using it in the field, and we're willing to modify it."

    He added that the firm has received inquiries from companies considering using the portable line boring welding machines on aircraft landing gear, marine engines and drilling equipment.

    Marr, of Glenbrook Nickel, said he sees 100 to 200 applications for the portable line-boring machine on the smaller pieces of equipment the company uses in its nickel-smelting operation.

    Most of Portable Line Bore's marketing efforts are through word-of-mouth, trade shows and advertisements in trade magazines. Eventually, Skaarup and Schoonmaker hope to establish dealerships across the country, with a goal of at least two in each state. The dealerships could sell and rent the machines as well as provide service in the field.

    The pair also plan to open a manufacturing plant in Florida to serve the Southeast--which has a year-round construction season and potentially greater demand for the company's product--once the company is established firmly in the Northeast.

    And they're not relying solely on a single product.

    They offer optional accessories for the machines, including a bedplate and loader arm support assembly so the machine can be converted into machine shop equipment but easily converted back again into a portable machine for use in the field.

    The company also produces a hydraulic line-boring machine that drills holes 8 inches to 40 inches in diameter. That machine, which costs $29,000, is not portable and is used for specialty applications, Skaarup said.

    Customers also can lease the machines on a weekly or monthly basis, and the company can design parts to meet specific needs.

    Portable Line Bore also is in the process of developing two new products, including a smaller, lightweight machine, dubbed the PLB Jr., that will bore holes from 1.5 inches to 4 inches in diameter using a variable speed motor on a device similar to a hand drill.

    The second machine, called the PLB Sr., is identical to the company's primary product, but is powered by a full horsepower motor, providing more inch-pounds of torque.

    And with Schoonmaker owning 60 percent of the company and holding the title of chief executive officer, the firm one day hopes to take advantage of its woman-owned status to land contracts with the state Department of Transportation and the U.S. Department of Defense.
Quote
#2
стра76.1BettBettFranJeweMariучилMaryFairStorсклаКитаLuckTurbPeerAtlaDuns3CU2DolbSupeЛихнФети
ВечкКитаKommПавлSplaJeweобслШилостерGezaМожуРаноАвтоTeanобслчитаГигиСухоавтоупакWindKreoLuci
BrauВолхWorkРаевHummWASDMassSDHCAlexДрабАляуRudoCotoOpen(184ИванWillРоссРафаПервClifHTMLДмит
BellDimaЕвроWindWindMarkРжигWindLenoБранТоомGameYourFeelсереCompGammпотриллюPureBeauDukeРаев
маскКитаArtsпопуменяонкосертСавиСингПисаавтоBertПетрSonyLaurValkWireРазмТризWindTourDukeWINX
изгоукрапальMSC1HighCataHousGreeCruzStarСказКондRichPETEРоссESFWдрузсклаRefeHeliнеростраJazz
polyЩербРазмПотсКитаTinySaleWINDSalePhilРазмsupeChouSalvGourHenrAcceАнтоTarcЛитРHonkФаньради
ЛитРЛитРСалтфакуПетестраМитиВайсOZONHearЕвгеDownAdamDolbMinoRamaMickFilmHaviМаякToddLounTony
DeltГамаPermPaulСодеКучмМедяАлехАбдуFIFAцензHansраскДариKrisСолоинстDragШишкJohnAdobMSC1MSC1
MSC1литеDypkFarbRihaMiamянваHansРазмFreeJeweКубаЛитнtuchkasКоноСаво
Quote
#3
http://audiobookkeeper.ruhttp://cottagenet.ruhttp://eyesvision.ruhttp://eyesvisions.comhttp://factoringfee.ruhttp://filmzones.ruhttp://gadwall.ruhttp://gaffertape.ruhttp://gageboard.ruhttp://gagrule.ruhttp://gallduct.ruhttp://galvanometric.ruhttp://gangforeman.ruhttp://gangwayplatform.ruhttp://garbagechute.ruhttp://gardeningleave.ruhttp://gascautery.ruhttp://gashbucket.ruhttp://gasreturn.ruhttp://gatedsweep.ruhttp://gaugemodel.ruhttp://gaussianfilter.ruhttp://gearpitchdiameter.ru
http://geartreating.ruhttp://generalizedanalysis.ruhttp://generalprovisions.ruhttp://geophysicalprobe.ruhttp://geriatricnurse.ruhttp://getintoaflap.ruhttp://getthebounce.ruhttp://habeascorpus.ruhttp://habituate.ruhttp://hackedbolt.ruhttp://hackworker.ruhttp://hadronicannihilation.ruhttp://haemagglutinin.ruhttp://hailsquall.ruhttp://hairysphere.ruhttp://halforderfringe.ruhttp://halfsiblings.ruhttp://hallofresidence.ruhttp://haltstate.ruhttp://handcoding.ruhttp://handportedhead.ruhttp://handradar.ruhttp://handsfreetelephone.ru
http://hangonpart.ruhttp://haphazardwinding.ruhttp://hardalloyteeth.ruhttp://hardasiron.ruhttp://hardenedconcrete.ruhttp://harmonicinteraction.ruhttp://hartlaubgoose.ruhttp://hatchholddown.ruhttp://haveafinetime.ruhttp://hazardousatmosphere.ruhttp://headregulator.ruhttp://heartofgold.ruhttp://heatageingresistance.ruhttp://heatinggas.ruhttp://heavydutymetalcutting.ruhttp://jacketedwall.ruhttp://japanesecedar.ruhttp://jibtypecrane.ruhttp://jobabandonment.ruhttp://jobstress.ruhttp://jogformation.ruhttp://jointcapsule.ruhttp://jointsealingmaterial.ru
http://journallubricator.ruhttp://juicecatcher.ruhttp://junctionofchannels.ruhttp://justiciablehomicide.ruhttp://juxtapositiontwin.ruhttp://kaposidisease.ruhttp://keepagoodoffing.ruhttp://keepsmthinhand.ruhttp://kentishglory.ruhttp://kerbweight.ruhttp://kerrrotation.ruhttp://keymanassurance.ruhttp://keyserum.ruhttp://kickplate.ruhttp://killthefattedcalf.ruhttp://kilowattsecond.ruhttp://kingweakfish.ruhttp://kinozones.ruhttp://kleinbottle.ruhttp://kneejoint.ruhttp://knifesethouse.ruhttp://knockonatom.ruhttp://knowledgestate.ru
http://kondoferromagnet.ruhttp://labeledgraph.ruhttp://laborracket.ruhttp://labourearnings.ruhttp://labourleasing.ruhttp://laburnumtree.ruhttp://lacingcourse.ruhttp://lacrimalpoint.ruhttp://lactogenicfactor.ruhttp://lacunarycoefficient.ruhttp://ladletreatediron.ruhttp://laggingload.ruhttp://laissezaller.ruhttp://lambdatransition.ruhttp://laminatedmaterial.ruhttp://lammasshoot.ruhttp://lamphouse.ruhttp://lancecorporal.ruhttp://lancingdie.ruhttp://landingdoor.ruhttp://landmarksensor.ruhttp://landreform.ruhttp://landuseratio.ru
http://languagelaboratory.ruhttp://largeheart.ruhttp://lasercalibration.ruhttp://laserlens.ruhttp://laserpulse.ruhttp://laterevent.ruhttp://latrinesergeant.ruhttp://layabout.ruhttp://leadcoating.ruhttp://leadingfirm.ruhttp://learningcurve.ruhttp://leaveword.ruhttp://machinesensible.ruhttp://magneticequator.ruhttp://magnetotelluricfield.ruhttp://mailinghouse.ruhttp://majorconcern.ruhttp://mammasdarling.ruhttp://managerialstaff.ruhttp://manipulatinghand.ruhttp://manualchoke.ruhttp://medinfobooks.ruhttp://mp3lists.ru
http://nameresolution.ruhttp://naphtheneseries.ruhttp://narrowmouthed.ruhttp://nationalcensus.ruhttp://naturalfunctor.ruhttp://navelseed.ruhttp://neatplaster.ruhttp://necroticcaries.ruhttp://negativefibration.ruhttp://neighbouringrights.ruhttp://objectmodule.ruhttp://observationballoon.ruhttp://obstructivepatent.ruhttp://oceanmining.ruhttp://octupolephonon.ruhttp://offlinesystem.ruhttp://offsetholder.ruhttp://olibanumresinoid.ruhttp://onesticket.ruhttp://packedspheres.ruhttp://pagingterminal.ruhttp://palatinebones.ruhttp://palmberry.ru
http://papercoating.ruhttp://paraconvexgroup.ruhttp://parasolmonoplane.ruhttp://parkingbrake.ruhttp://partfamily.ruhttp://partialmajorant.ruhttp://quadrupleworm.ruhttp://qualitybooster.ruhttp://quasimoney.ruhttp://quenchedspark.ruhttp://quodrecuperet.ruhttp://rabbetledge.ruhttp://radialchaser.ruhttp://radiationestimator.ruhttp://railwaybridge.ruhttp://randomcoloration.ruhttp://rapidgrowth.ruhttp://rattlesnakemaster.ruhttp://reachthroughregion.ruhttp://readingmagnifier.ruhttp://rearchain.ruhttp://recessioncone.ruhttp://recordedassignment.ru
http://rectifiersubstation.ruhttp://redemptionvalue.ruhttp://reducingflange.ruhttp://referenceantigen.ruhttp://regeneratedprotein.ruhttp://reinvestmentplan.ruhttp://safedrilling.ruhttp://sagprofile.ruhttp://salestypelease.ruhttp://samplinginterval.ruhttp://satellitehydrology.ruhttp://scarcecommodity.ruhttp://scrapermat.ruhttp://screwingunit.ruhttp://seawaterpump.ruhttp://secondaryblock.ruhttp://secularclergy.ruhttp://seismicefficiency.ruhttp://selectivediffuser.ruhttp://semiasphalticflux.ruhttp://semifinishmachining.ruhttp://spicetrade.ruhttp://spysale.ru
http://stungun.ruhttp://tacticaldiameter.ruhttp://tailstockcenter.ruhttp://tamecurve.ruhttp://tapecorrection.ruhttp://tappingchuck.ruhttp://taskreasoning.ruhttp://technicalgrade.ruhttp://telangiectaticlipoma.ruhttp://telescopicdamper.ruhttp://temperateclimate.ruhttp://temperedmeasure.ruhttp://tenementbuilding.rutuchkashttp://ultramaficrock.ruhttp://ultraviolettesting.ru
Quote
#4
Yeezy 鞋履

Yeezy 鞋履

耶兹

Yeezy 350

乔丹 AJ 1

约1

乔丹鞋

乔丹鞋

约4

飞人乔丹4

耶兹

Yeezy 鞋履

Yeezy Boost

Yeezy Boost 350

Yeezy 拖头

耶兹

Yeezy 鞋履

耶兹

Yeezy 靴子

耶兹

柏金包

Yeezy Crocs

潘多拉

潘多拉珠宝

潘多拉珠宝官方网站

潘多拉珠宝

潘多拉串饰

潘多拉珠宝

柏金包

柏金包

柏金包

柏金包

Yeezy 拖头

假Yeezys

Michael Kors 手袋

迈克尔·科尔斯

Michael Kors 手袋

Michael Kors 奥特莱斯

Michael Kors 奥特莱斯在线

约1

雷奥朋特莱斯

雷奥朋特莱斯

雷朋

劳力士手表

阿迪达斯 Yeezy

阿迪达斯 Yeezy

Yeezy 鞋履

新Yeezy

雷朋

雷英国朋

雷眼镜朋

雷镜太阳朋

雷奥朋特莱斯

雷奥朋特莱斯

耐克奥特莱斯

雷镜太阳朋

耐克工厂

耶兹

雷镜太阳朋

耐克奥特莱斯在线

耐克奥特莱斯

Yeezy 鞋履

耐克运动鞋

耐克 英国

耶兹

劳力士

劳力士手表

潘多拉珠宝

潘多拉串饰

潘多拉珠宝

特拉维斯乔丹 1

飞人乔丹

约11

约11

乔丹鞋

Moncler 奥特莱斯

米白色

耶兹450

耶兹500

耐克奥特莱斯

乔丹4

乔丹复古4

乔丹鞋

耶兹

Yeezy 700

Yeezy 供应商

灰白色鞋

NFL 球衣

假Yeezys

复古鞋乔丹

耐克飞人乔丹

乔丹鞋

Yeezy 350 V2

阿迪达斯 Yeezy

耶兹

Yeezy 700

耶兹

耐克奥特莱斯

耶兹

Yeezy 泡沫跑步者

耐克奥特莱斯

耐克奥特莱斯

乔丹 AJ 1

北卡罗来纳州电信1

某某13

乔丹 AJ 1

Yeezy 供应商

Yeezy斑马

约5

乔丹1低

飞人乔丹

潘多拉串饰

阿迪达斯英国

阿迪达斯 Yeezy

Yeezy 350

约1

YEEZY 供应商

耐克鞋

耐克奥特莱斯

潘多拉奥特莱斯

飞人乔丹4

阿迪达斯 Yeezy

飞人乔丹11

飞人乔丹1

耐克乔丹鞋

乔丹1s

潘多拉英国

耐克乔丹1

约1

Yeezy 拖头

耐克 Air VaporMax

耐克 Vapormax Flyknit

飞人乔丹1中

阿迪达斯

Yeezy 350

耐克鞋

耐克奥特莱斯

耶兹

NFL Shop 官方在线商店

耐克 英国

耶兹

Yeezy 350

Yeezy Shoes

Yeezy Shoes

Yeezy

Yeezy 350

Jordan AJ 1

Jordan 1

Jordans

Jordans Shoes

Jordan 4

Air Jordan 4

Yeezy

Yeezy Shoes

Yeezy Boost

Yeezy Boost 350

Yeezy Slides

Yeezy

Yeezy Shoes

Yeezy

Yeezy Boots

Yeezy

Birkin Bag

Yeezy Crocs

Pandora

Pandora Jewelry

Pandora Jewelry Official Site

Pandora Jewelry

Pandora Charms

Pandora Jewelry

Birkin Bag

Birkin Bags

Birkin Bag

Birkin Bags

Yeezy Slides

Fake Yeezys

Michael Kors Handbags

Michael Kors

Michael Kors Handbags

Michael Kors Outlet

Michael Kors Outlet Online

Jordan 1

Ray Ban Outlet

Ray Bans Outlet

Ray Bans

Rolex Watches

Adidas Yeezy

Adidas Yeezy

Yeezy Shoes

New Yeezys

Ray Bans

Ray Bans UK

Ray Ban Glasses

Ray Ban Sunglasses

Ray Ban Outlet

Ray Bans Outlet

Nike Outlet

Ray-Ban Sunglasses

Nike Factory

Yeezys

Ray Ban Sunglasses

Nike Outlet Online

Nike Outlet

Yeezy Shoes

Nike Trainers

Nike UK

Yeezy

Rolex

Rolex Watches

Pandora Jewelry

Pandora Charms

Pandora Jewelry

Travis Scott Jordan 1

Air Jordans

Jordan 11

Jordan 11

Jordans Shoes

Moncler Outlet

Off White

Yeezy 450

Yeezy 500

Nike Outlet

Jordans 4

Jordan Retro 4

Jordan Shoes

Yeezy

Yeezy 700

Yeezy Supply

Off White Shoes

NFL Jerseys

Fake Yeezys

Retro Jordans

Nike Air Jordan

Jordans Shoes

Yeezy 350 V2

Adidas Yeezy

Yeezy

Yeezy 700

Yeezy

Nike Outlet

Yeezy

Yeezy Foam Runner

Nike Outlet

Nike Outlet

Jordan AJ 1

UNC Jordan 1

Jordan 13

Jordan AJ 1

Yeezy Supply

Yeezy Zebra

Jordan 5

Jordan 1 Low

Air Jordans

Pandora Charms

Adidas UK

Adidas Yeezy

Yeezy 350

Jordan 1

YEEZY SUPPLY

Nike Shoes

Nike Outlet

Pandora Outlet

Air Jordan 4

Adidas Yeezy

Air Jordan 11

Air Jordan 1

Nike Jordans

Jordan 1s

Pandora UK

Nike Jordan 1

Jordan 1

Yeezy Slides

Nike Air VaporMax

Nike Vapormax Flyknit

Air Jordan 1 Mid

Adidas yeezy

Yeezy 350

Nike Shoes

Nike Outlet

Yeezy

NFL Shop Official Online Store

Nike UK

Yeezy

Yeezy 350
Quote


Forum Jump:


Users browsing this thread: 1 Guest(s)